|
Aetna 253-CL "Cube" (1934)
Aetna was brand name for radios sold in Walgreens Drug Stores based in Chicago, IL. They used several companies to manufacture their brand, with initials of the manufacturer on the label. Detrola (DL), Sentinel (SL), Belmont (BRC), Warwick (WMCO), Wells-Gardner (WG), Colonial (CL) and others. The 253-CL was originally a four-tube, AM only TRF radio, but this radio has replacement AA5 chassis and plays great! Gary stripped and refinished the "cube" cabinet to a "piano" lacquer finish (yes, even Aetna had a cube design!). The very colorful original dial scale, back, knobs and escutcheon are original. This is a totally unique radio that will play for years. Priced right, so make it yours today! 10-1/2"W x 8"H x 7"D.
$549.00. (1600561)
|
|
|
Airline 62-158 (1935)
Montgomery Ward started advertising radios in their catalog in 1921, selling radios from other companies. They started using the Airline name in 1923, selling one- to three-tube radios made by a company called TRESCO. They had "Airline" with a lightning bolt through it and Montgomery Ward "adopted" Airline as it own brand name, and changed the look of the logo. The 62-158 is a seven-tube, two-band (SB,SW) radio that was manufactured by Wells-Gardner. The chassis was used in this model and a console version. It has plenty of volume, with great sensitivity across the unique dial. Wards was starting to use Art Deco design in their radios, and this one in particular hits a home run with its "skyscraper" design that defined the period. We went through the electronics replacing all of the capacitors with new equivalents. The resistors and tubes were checked and replaced where necessary. We installed a new power cord, safety fuse, and an audio cable. Gary stripped and refinished the radio to a "factory fresh" look with a wonderful lacquer finish. The radio retains its original chassis, speaker and knobs. This is the second 62-158 for sale at the Radio Attic. A great addition to any collection! 17"H x 16"W x 11"D.
$599.00. (1600573)
|
|
|
Airline 62-228 (1935)
This incredible radio was built by Wells-Gardner for Montgomery Wards. The huge, multi-colored stationized dial also contains the volume, bass and treble indicators. The chassis is chrome, so I'm guessing this was the top-of-the-line table radio for Wards in 1938. The 62-228 is an eight-tube, three-band (SB,SWx2) set with console-like fidelity and volume. All of the capacitors have been replaced. Resistors and tubes checked and replaced where needed. A new power cord, tuning belt and audio cable were installed. Gary stripped off the old finish and skillfully refinished the Walnut cabinet to a better-than-new lacquer finish. The radio has the original chassis, knobs and 8-inch speaker. The new tuning eye is bright and active. A gorgeous and rare radio in perfect condition! 22-5/8"W x 15"H x 10-1/2"D.
$1,195.00. (1600576)
|
|
|
Airline 62-329 (1937)
I've mentioned this before: Montgomery Wards sold millions of products without manufacturing anything! Radios were no exception. Just on the Radio Museum alone over 2,000 models are listed. They did succeed as they used very good radio manufacturers and sold quality products. The list of manufacturers of Airline radios is long. Wells-Gardner, Belmont, Davidson-Haynes, US Radio Corp. and Kingston Radio. Here is a list of the manufacturers' abbreviations used on many labels of Airline radios: AA, BR, CB, CCB, GAA, GHM, GSE, GSL, GWM, HA, JB, JP, KP, KR, WG and others! The 62-329 is a nine-tube, three-band (SB,SWx2) radio. The set utilizes two 6F6 tubes for push-pull audio through an 8-inch speaker, which enhances the volume noticeably. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced where necessary. A new power cord, safety fuse, antenna lead and an audio input cable were installed. Gary stripped off the old finish, and ended up with a gorgeous "piano" lacquer finish. The original knobs, dial scale, chassis and speaker were retained. This radio is a great performer across the dial with plenty of volume and tone control and a bright and active tuning eye tube. This large, unique Airline can be a great addition to your collection, and will offer years of use. It's ready to go to a new home! 23"W x 12-1/2"H x 9"D.
$749.00. (1600524)
|
|
|
Airline 62-367 "Teledial" (1937)
In the 1930's, radios were the cutting edge of new electronic innovation for consumers of that generation. Competition was fierce, so manufacturers were constantly improving the radios and adding features. The Teledial was a quick way to dial in your favorite stations without having to manually turn a dial and search. Most of them were set up much like a rotary dial on telephones, and made the tuning process much easier and faster. All the radio manufacturers at one time or another featured Teledials, soon replaced by electric selection and motorized dials. The 62-367 is a seven-tube, two-band (SB+SW) radio. We replaced all of the capacitors with new equivalents. The resistors and tubes were checked and replaced where needed. A new power cord, safety fuse and external audio cable were installed. The Teledial is backlit and the eye tube is bright and active. Gary stripped the Walnut cabinet and skillfully applied lacquer for a gorgeous "piano" finish. The set has original knobs, chassis and speaker. A unique and beautiful radio which will grace anyone's collection! 23-1/2"W x 11"H x 12-1/2"D.
$795.00. (1600456)
|
|
|
Aria 175 (1938)
Aria was one of a hundred brands built by Detrola, and was sold in Wieboldt Department Stores of Chicago. Detrola also supplied Western Auto (Truetone) and Sears (Silvertone), just to name two, with thousands of radios. They were the most productive company in the USA, providing radios for department stores and small retailers. The chassis used in the Aria was used in other radios (Detrola 175E) and consoles under different sellers. The 175 is a eight-tube, three-band (SB,SWx2) radio. It produces a ton of volume with push-pull audio through a rebuilt Rola eight-inch speaker. The radio features motorized tuning which functions perfectly. The capacitors have been replaced, and all of the resistors and tubes have been checked and replaced where necessary. A safety fuse, audio cable, new tuning eye, antenna lead and a new power cable have been installed. Gary stripped the radio and refinished with a "piano" hand-rubbed lacquer finish. This dark Walnut set is elegant and gorgeous at the same time! An excellent example of the Aria version of this Detrola-made radio. 21"W x 12"H x 9"D.
$849.00. (1600454)
|
|
|
Atwater Kent 84 (1932)
When cathedral radios were first offered in the early 1930's, they were referred to as midget or compact radios. They were so much smaller than the console and large "coffin" style radios that preceded them. By today's standards they are quite large and heavy. The model 84 does have a darker "gothic" look, but also has a beauty of its own. The graceful arched and pointed top is graced with simple side moldings. This six-tube, AM-only radio plays loud and clear with great tone and sensitivity through the original 8-inch speaker. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced where needed. We installed a safety fuse, new antenna lead and an audio input cable. The switch on the back of the chassis is a tone control. Gary Marvin's comment on the cabinet: "This is about the nicest AK that I have ever had and I wouldn't have refinished it, except someone already had. There were no repairs to the cabinet and I refinished it with grain filler, toner and satin lacquer." The chassis, speaker, knobs and grille cloth are original. This beautiful and great performing radio is ready for your collection. Don't miss out on this highly collectable Atwater Kent! They aren't making them any more folks! 19-1/2"H x 15-1/2" W x 10"D.
$795.00. (1600532)
|
|
|
Coronado 740 (1937)
Coronado radios were manufactured by the Gamble-Skogmo Company of Minneapolis. The two men were college buddies, and started in 1920 with an automobile dealership, and then auto parts stores. By 1939 they had 1500 dealers, with 300 stores in 24 states. The company started selling radios in the mid-1930's and had a Los Angeles factory as well. They were affiliated with Western Auto and sold some models in Western Auto stores. The 740 is a seven-tube, three-band (AM,SWx2) radio with push-pull audio. It seems over the years that most Coronado radios that are around are battery sets, but this model is an AC set. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced where necessary. A new power cord, safety fuse, audio input cable and antenna lead were installed. This radio is a very good performer and is very sensitive across the dial. Gary Marvin stripped off the old finish and refinished with his usual mastery. The end result is a gorgeous lacquer "piano" finish. The chassis, speaker, knobs and glass dial are all original. The grille cloth is an accurate reproduction of the original cloth. This is a great performing set at a great price! 22"W x 12"H x 10"D.
$695.00. (1600546)
|
|
|
Crosley 517 "Fiver" (1938)
The Crosley "Fiver" name was used on several models. I found at least six models using the "Fiver" name, utilizing the same basic five-tube chassis. The model we have for sale today was referred to as the "Fiver Compact Louver Front" and was available in three color combinations. The cabinet is metal with a louvered Bakelite grille. I would think they made a lot of them, but this is the first one we've seen, so maybe not? The 517 is a five-tube, two-band (AM,SW) radio. A nice feature is the three-dimensional mirrored dial. We replaced all of the capacitors with new equivalents. The resistors and tubes were checked and replaced where needed. A new power cord, safety fuse, antenna lead and audio input cable were installed. Gary cleaned up and repainted the radio to its original factory two-toned colors of bronze and black. The set has the original knobs, Utah speaker and chassis. The radio has a "factory-fresh" look to it and would be a great addition to any collection! 13"W x 8"H x 7"D.
$495.00. (1600570)
|
|
|
Detrola 3281 with Clock (1941)
Most people have clock radios. Usually it's the radio on your bed stand with a clock and alarm to help you get up in the morning. In the 30's and 40's, a clock radio was simply a radio in a nice cabinet that also sported a regular, time-keeping clock...no alarm, just a nice electric clock. Here we have a Detrola version of one, the 3281 mantle clock radio. The 3281 is a six-tube (seven plus a ballast tube) AM/SW, AC/DC clock/radio. The clock is not marked, but an educated guess would be a Techron clock, (found in most early clock radios), but since The Ingraham Clock Company made the cabinet for Emerson, it could possibly be an Ingraham clock. We replaced all of the capacitors with modern values. The resistors and tubes were replaced where needed. We installed a safety fuse and a new power cord. Gary stripped and refinished this gorgeous Ingraham cabinet. Gary stated: "This has looks and performance! The cabinet is built by Ingraham for Detrola and it's in the mantle clock design and the photos don't do it justice!" The chassis, speaker, clock, knobs, back, dial scale and dial cover are all original to the set. How Detrola was able to squeeze a seven-tube chassis into the cabinet is amazing! It receives local broadcasts loud and clear across the dial with good tone. The clock has been lubed and operates properly. The knob in the back lower left is the AM/SW switch. 12-1/2"W x 10-1/2"H x 7"D.
$995.00. (1600567)
|
|
|
Emerson BF-214 (1939)
Emerson Radio Corporation of New York City started making phonographs in 1912, and is still producing electronic products today. Ingraham Clock Company started producing radio cabinets around 1935, and Emerson radios used many if not the the most. The cabinets used angles and curves, coupled with wonderful designs using the best veneers. The BF-214 is a five-tube, two-band (AM,SW) AC/DC set. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced if needed. A new power cord was installed along with a safety fuse and antenna lead. The radio has good sensitivity and volume, and has a tone control. Gary stripped the walnut cabinet. He sanded the radio and used the best quality grain fillers and toners. Lacquer was skillfully applied and a gorgeous "piano" finish remained! The radio has the original knobs, speaker, chassis and back. The "Ingraham" badge is present along with a crystal clear dial cover from dial cover.com. Just a beautiful Emerson "Ingraham" radio! 13-1/2"W x 8-1/2"H x 8"D.
$495.00. (1600553)
|
|
|
Emerson BJ-210 (1938)
Here's another classic Emerson with a stylish Ingraham cabinet. The black and red vinyl inlay around the bottom certainly gives this radio some character, perhaps a simple identity from several Emerson models that are very similar in size. The BJ-210 is a five-tube, two-band (AM,Police) AC/DC radio. The BJ is a chassis designation telling us that it was manufactured by Belmont. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced where necessary. We added a new power cord, safety fuse and antenna lead. (We do not install audio input cables on AC/DC radios due to electrical shock hazard) This radio performs well across the dial with plenty of volume. Gary did a great job stripping the old finish and applied a beautiful "piano" lacquer finish. The original knobs, chassis and speaker are present. This is a restored Emerson that plays well and is priced right. This radio should perform well for a long time! 14"W x 9-1/2"H x 8-1/4"D.
$449.00. (1600490)
|
|
|
Emerson CH-256 "Stradivarius" (1939)
Perhaps one of the most beautiful and identifiable Ingraham cabinets is the violin-shaped "Stradivarius" manufactured in 1939 for Emerson. There were two versions: one in Quilted Maple and the other, which we have here, in Walnut. The "Strad" is a five-tube, AM only, AC/DC radio. It's all about the cabinet folks, but this radio performs very well too. This radio was restored by the previous owner. All of the capacitors have been replaced with modern equivalents. The resistors and tubes were checked and replaced where needed. A new power cord and antenna lead were added. This is really nice example of this radio and it really does perform well across the dial. The beautifully figured Walnut cabinet has been finished in a satin lacquer by Gary Marvin. The original knobs, speaker chassis and Ingraham badge are with the set. The dial cover is crystal-clear and a new back was added. This radio is better than when it came from the factory! 11"W x 6"H x 5-1/2"D.
$1,495.00. (1600560)
|
|
|
Emerson L-141 "Cube" (1937)
The Emerson Phonograph Company was formed in New York City in 1918. They started making radios in 1924, and produced the first phonograph/radio combination. By WWII, it held one sixth of the U.S. radio market. With the advent of television, their sales more than doubled by 1950. Emerson is still in business today. The L-141 is a five-tube, two-band (AM,SW-disabled) radio. We replaced all of the capacitors with Mylar equivalents. The resistors and tubes were checked and replaced where needed. A safety fuse, new antenna lead, audio input cable and a new power cord were installed. The Ingraham cabinet has Burl Walnut and Walnut veneers with maple and ebony inlays. Gary stripped the cabinet, and ended up with a gorgeous "piano" lacquer finish. The original chassis, speaker and knobs are with the set, as are the Emerson and Ingraham badging. The "cube" design was a rare radio for Emerson, but they wanted to get in on the popularity and sales of the cubes. This is one beautiful radio for any collection, and a wonderful addition to Emerson collections. 14"H x 11"W x 8"D.
$799.00. (1600510)
|
|
|
Emerson R-158 (1938)
Emerson started producing phonographs in 1915 in New York City, and is still producing products today. Emerson has made phonographs, radios, televisions, air conditioners, and later on it made refrigerators, computers, defibrillators, CD players and VCRs. The R-158 is a five-tube, two-band (SB,police) set. It was offered with a TV band at one time as well. We replaced all of the capacitors with modern equivalents. Resistors and tubes were checked and replaced where needed. The radio has the original power cord, and a safety fuse, antenna lead and audio cable were installed. The radio has very good sensitivity across the dial, and performs with nice tone and plenty of volume. Gary refinished the Rosewood and Walnut cabinet with the best products. This is an Ingraham cabinet and the Ingraham badge is present. The unique cabinet is accented with two brass strips that cross over the top and down the front of the set. The radio has the original dial with a clear dial cover, and the chassis, knobs, and speaker are original. Gary finished with a beautiful lacquer "piano" finish. A really nice looking and performing set for your collection. 15"W x 9-1/2"H x 7-1/2"D.
$449.00. (1600515)
|
|
|
Fairbanks-Morse 5-A (1938)
Fairbanks-Morse started selling radios in 1934 in Chicago, in the plant that originally housed the Audiola Radio Co., which Fairbanks-Morse purchased. They moved radio production to Indianapolis in 1936. In 1939, the Indianapolis plant burned down, and Fairbanks-Morse ceased radio production in the USA. They did continue to produce radios and later televisions in Canada. The 5-A is a five-tube, AM-only set. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced where necessary. We installed a safety fuse, new power cord, audio input cable and wired in a new antenna. Gary did his usual masterful work on the rounded cabinet. He ended up with a beautiful "piano" lacquer finish. It has the original knobs, a period-correct grille cloth, the chassis, dial cover and speaker are all original. They were quality radios, and always get a lot of attention in collections. If you're looking for a Fairbanks-Morse for your collection, this beautifully restored radio is priced to sell! 13"W x 9"H x 6-1/2"D.
$395.00. (1600572)
|
|
|
Fairbanks-Morse 6-AT4 (1938)
Fairbanks-Morse started selling radios in 1934 in Chicago, in the plant that originally housed the Audiola Radio Co., which Fairbanks-Morse purchased. They moved radio production to Indianapolis in 1936. In 1939, the Indianapolis plant burned down, and Fairbanks-Morse ceased radio production in the USA. They did continue to produce radios and later, televisions in Canada. The 6AT4 is a six-tube, three-band (AM,SWx2) set. The large, multi-colored dials were a feature of their radios. They were quality radios, and always get a lot of attention in collections. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked, replacing where necessary. We installed a new power cord, audio cable and wired in a new antenna. The new eye tube is bright and active. Gary did his usual masterful work on the rounded cabinet. He ended up with a beautiful "piano" lacquer finish. It has the original knobs, a period-correct grille cloth, and the chassis and speaker are all original. This is a large, rare set and will be the centerpiece in someone's collection. 19"W x 12"H x 10"D.
$995.00. (1600568)
|
|
|
Firestone 7405-2/R-1651AS "Air Chief" (1936)
Firestone didn't manufacture their own radios. Other companies made them, and then branded them Firestone to be sold in Firestone tire stores. This model was made by Stewart-Warner. Most of their radios were of high quality manufactured by some of the best companies in the USA. The 7405-2/R-1651AS is a five-tube, two-band (AM,police) radio. We replaced all of the capacitors with modern equivalents. The resistors and tube were checked and replaced where needed. A new power cord and antenna lead were installed. The radio performs well with plenty of volume across the dial. Gary stripped the cabinet, and using the best materials, ended up with a "piano" lacquer finish. The radio has the original knobs, dial, speaker and chassis. This seldom seen model is priced to sell, and is a unique set for anyone's collection. 14"W x 9-1/2"H x 8"D.
$495.00. (1600556)
|
|
|
General Electric F-62 (Canada, 1938)
In 1892, the merger of Edison Light Electric Company and Thomson-Houston Electric Light Company of Canada created the Canadian General Electric Company. GE took over existing facilities that were already manufacturing generators, transformers, motors, wire and cable and lamps. They started manufacturing tubes in 1921 and small appliances in 1922 and continued well into the 1940's. The GE F-62 was a Canadian made six-tube, three-band (AM,SWx2) radio. We replaced all of the capacitors with new equivalents. Resistors and tubes were checked and replaced where necessary. We installed a safety fuse, new power cord, audio input cable and antenna lead. The radio is a very good performer across the dial. Gary stripped off the old finish. This gorgeous radio of Mahogany and Zebrawood veneers turned out with a beautiful "piano" lacquer finish. The knobs, chassis, speaker and dial scale are original. Tenite bezels, which are usually found shrunk and cracked, is in perfect condition. The dial cover is crystal-clear and the band indicator is located at the bottom of the dial. A really nice and unique radio for anyone's collection! 19-1/4"W x 12"H x 9"D.
$679.00. (1600548)
|
|
|
Grunow 550 "Chromefront" (1934)
Starting in 1928 in Chicago, Grigsby-Grunow produced the famous and high performing Majestic brand radios. They hired the brightest engineering talent available and became one of the most prolific radio and tube manufacturing companies of the time. In spite of the depression in 1929, Majestic radios were very successful and were even distributed in Europe and Africa. By 1931, Mr. Grunow started General Household Utilities Co. and produced radios under the Grunow name. The 550 is a five-tube, AM only, AC/DC radio. The chassis was completely rebuilt using modern capacitors. All of the resistors and tubes were checked and replaced where needed. A new power cord and antenna lead were installed. An external audio cable is not available for this AC/DC set. Most of the finish is original (restored) except that Gary did redo the top. The original knobs and speaker are with the radio. A reproduction of the original cloth was installed. The chrome is in perfect condition, and the radio performs perfectly! This seldom seen early Grunow is ready to grace your collection... make it yours! 12"W x 8"H x 5-1/2"D.
$599.00. (1600389)
|
|
|
Grunow 650 (1934)
In 1933, Grunow Corporation of Chicago merged with U.S. Radio and Television to form General Household Utilities Company. From 1933 on, they continued with the brand Grunow, coming out in 1936 with "Teledial Twelve" nicknamed the "Shirley Temple" as the child star was used in advertising. The model 650 is a six-tube, two-band (SB,SW) radio. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked, replacing all out-of-tolerance components. An audio input cable, safety fuse and new power cord were installed, along with a new antenna lead wire. The radio was aligned and plays strong across the dial with good sensitivity. Gary stripped the old finish off the cabinet. He refinished the American Walnut veneers using high quality toners and lacquer, ending up with a gorgeous "piano" lacquer finish. The original speaker, knobs, chassis and dial scale are present and we installed a period-correct grille cloth. This is a really nice example of a model 650 and is priced right, ready for your collection! 19-1/2"H x 14"W x 9-1/2"D.
$649.00. (1600535)
|
|
|
Grunow 750 "World Cruiser" (1935)
We have mentioned the bankruptcy and split up in 1932 of Grigsby-Grunow based in Chicago. By the time the model 750 came out, they had recaptured the market with quality radios and exquisite cabinetry. The 750 was Grunow's top-of-the-line table radio in 1935. This large seven-tube, four-band (SB,SWx2,police) beauty sported twin gangs on the AM tuner for greater sensitivity and lots of volume through the original 8-inch Grunow speaker. Their cabinet work played second fiddle to no one, and the 750 is no exception. All of the capacitors were replaced. The resistors and tubes checked and replaced where needed. A safety fuse, power cord and external audio cable were added. Gary stripped the cabinet and refinished it using the best grain fillers, toners and finished with a "piano" lacquer finish. Notice the book matched Walnut in the front with contrasting colors. The original knobs, chassis and speaker are included. This stunning radio will grace any collection, and it can be yours in a matter of days! 20"H x 16-1/4"W x 12"D.
$895.00. (1600508)
|
|
|
Jackson-Bell 62 "Fleur-de-Lis" (1932)
Jackson Bell started radio production in Los Angeles, CA in 1926. Herb Bell began the business with his brother Elmer. Gilfillan made the chassis and Elmer made the cabinets. At one time or another, the whole family was involved in the business, including their father Anton. In 1929, Herb became partners with Mr. Jackson, and the company ceased operations in 1933. The model 62 is a six-tube, AM only radio. The radio had been restored by the previous owner, and Blake checked it out making sure it met our standards. A period-correct cloth power cord was installed. An audio cable is not available for this radio. Gary stripped the walnut cabinet. He finished the radio with a satin finish. The radio is gorgeous and has the original knobs and grille cloth. Also present is the often-missing "velvet tone" label located on the lower front of the radio. I think this tag is found only on the Fleur-de-Lis model. Other designs are the Swan, Tulip, Sunburst, Peacock, and the iconic Peter pan. If you are looking for a Fleur-de-Lis for your collection, it would be difficult to find one better than this one. 15"H x 13"W x 8-1/2"D.
$499.00. (1600303)
|
|
|
Knight "Atomic" (1937)
Knight radios were sold by the Allied Radio Corporation of Chicago. The Allied catalogs have been around since 1929 and offered all things electronic. The company is still in business, having once included Radio Shack. The Knight "Atomic" was nowhere to be found in any of their catalogs. We can't pinpoint a model number for that reason, although it has many characteristics and parts of several 1937 models. The "Atomic" is a seven-tube, three-band (AM,SWx2) radio. We replaced all of the capacitors with new equivalents. The resistors and tubes were checked and replaced where necessary. We installed a new power cable, safety fuse, audio input cable and antenna lead. This radio also has the speaker on the right which is something you don't see very often. The cabinet was completely refinished by Gary Marvin, and it is simply stunning! What a beautiful design with Walnut and Mahogany veneers trimmed in Ebony, and Gary ended up with a gorgeous "piano" lacquer finish. The radio has the original knobs, chassis, 8" speaker, back and dial. We believe this radio could be a one-off, so what a great piece for any collection! 21"W x 10-1/2"H x 9"D.
$995.00. (1600577)
|
|
|
Majestic 461 "Master Six" (1933)
Grigsby-Grunow of Chicago, IL started to manufacture Majestic radios in 1927. As the depression hit, the company faltered. In 1933, and in an attempt to bolster sales and save the company, they produced a new line of stylish, Art Deco radios, the "Smart Sets." The attempt failed and the company declared bankruptcy later that year. The 461 is a six-tube, AM (police on the upper end of the band) radio. We replaced all of the capacitors with modern equivalents. the resistors and tubes were replaced where necessary. We installed a safety fuse, new cloth-covered power cord with the original plug, audio input cable and a new antenna lead. The radio is a strong performer with good sensitivity and volume. Gary completely stripped the Walnut cabinet. The set has beautiful book-matched veneer on the front, and he ended up with a gorgeous "piano" lacquer finish. The radio has the original knobs, chassis and speaker. There aren't many of these sets around anymore, and very few have been offered on the Radio Attic. A unique radio for your collection! 17"H x 13"W x 8-1/2"D.
$549.00. (1600453)
|
|
|
Marshall (unknown model, 1935)
Here we have another radio with very little (basically none!) information available. Manufactured in the mysterious "Plant A" in Chicago, Marshall, Silver Marshall and several other brands were made by Clinton Manufacturing Company. Consequently, Clinton radios have similar model numbers of those they made for other companies. Clinton was later sold to Sonora Radio and Television Corp. This Marshall is a five-tube, three-band (AM,SWx2) AC/DC radio. A standout feature is the detailed, multi-colored dial. We replaced all of the capacitors with modern equivalents. All of the resistors and tubes were checked and replaced where needed. A new power cord, safety fuse and antenna lead were installed. Gary stripped off the old finish and ended up with a gorgeous "piano" lacquer finish. The radio has the original knobs, chassis, speaker, dial scale and glass dial cover. The original wooden back is present. Marshall's were know for their colorful dials, and this model is no exception. We often say a lot of radio models are rare, but this one truly fits the bill! 15"W x 8"H x 5-1/2"D.
$849.00. (1600565)
|
|
|
Norco 160 (1935)
Norco (Northwestern Radio Manufacturing Company) was founded in 1921 in Portland, Oregon by Charles Austin. He initially produced early TRF radios, but is famous for creating Oregon's first broadcast radio station (7XF). Later in 1930, he created Oregon's first short wave Police Radio station. He was also selling super-het radios made by Remler and Mission Bell with the Norco name on them. The Norco 160 is five-tube, three-band (AM,SW,Police) radio. The capacitors have been replaced with modern equivalents. The tubes and resistors have been checked and replaced where needed. A safety fuse, new power cord and external audio cable were installed. The walnut cabinet was completely stripped, grain-filled and painted. The set was finished with a hard lacquer "piano" finish, then hand-polished. The radio has the original badging, knobs, speaker, chassis, and a reproduction grille cloth. This is only the second Norco radio offered on the Radio Attic. I know we all use the word "rare" frequently, but in this case it truly applies! 17"H x 16"W x 10"D.
$449.00. (1600367)
|
|
|
Philco 70 "Baby Grand" (1932)
Up for sale today is this absolutely gorgeous and desirable 1932 Philco "Baby Grand" cathedral radio. This high-performance set receives AM broadcasts loud and clear with that warm tone that you get with these wonderful antique radios. This popular set sold over 300,000 units for Philco! The little brother of the highly collectable nine-tube Philco 90, this set along with the 90 and 21 were designed and patented by Edward Combs. The 70 is a seven-tube, AM only radio. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced where needed. A new period-correct cloth-covered power cord, safety fuse and antenna lead were installed. The radio has a ton of volume and really good sensitivity across the dial. Gary commented this was one of the nicest model 70's we've restored and the cabinet refinish is one of the best you will ever see. The original knobs, speaker and chassis are with this set. This is one fabulous radio, the iconic Philco 70, the quintessential cathedral radio! 18"H x 16-1/2"W x 10"D.
$795.00. (1600571)
|
|
|
Pilot 183 (1935)
Pilot Electric Manufacturing Company was founded in Brooklyn NY, by Isidor Goldberg in 1922. The company had several businesses, located in New York, Long Island and Massachusetts. They made early TRF sets and tubes. Pilot radios were also manufactured in England and Italy for the European market prior to WWII. The Pilot 183 is a six-tube, two-band (AM,SW) radio. The capacitors were replaced with new equivalents. The resistors and tubes were checked and replaced where needed. A new power cord, safety fuse, auxiliary input and antenna lead were installed. The cabinet has Walnut, Maple, Australian Laurel and Zebrawood veneers. Gary refinished it to a beautiful lacquer "piano" finish. The radio has the original knobs, chassis and speaker. A period-correct grille cloth was installed. Pilot radios of this quality are very hard to find, and are a great addition to any serious collection. Make this one yours today! 16"H x 13"W x 9"D.
$695.00. (1600370)
|
|
|
RCA 5T (1936)
In 1921, David Sarnoff started RCA as General Manager, and remained until 1970. By 1926, they already controlled the commercial radio industry, buying radio stations, and then formed NBC. Eventually, NBC was broken up into the other networks, ABC and CBS. More on RCA in upcoming ads. The 5T is a five-tube, two-band (SB,SW) radio. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced where necessary. We installed a polarized power cord, antenna lead, external audio cable (Bluetooth, iPhone, iPad) and a safety fuse. RCA made great sets, and this radio plays strong and picks up plenty of stations across the dial. Gary stripped the Walnut and Maple veneered cabinet. Using high-quality products and craftsmanship, he ended up with a "piano" lacquer finish. This radio has the original knobs, chassis, copper bezel, dial scale and 8-inch speaker. A new dial cover was installed along with a period-correct reproduction grille cloth. This gorgeous example of an RCA 5T would look perfect in your collection! 16"H x 13"W x 9"D.
$579.00. (1600459)
|
|
|
RCA 9TX-3 "Little Nipper" (1939)
Even with a stranglehold on the radio industry holding all the patents for superheterodyne technology, RCA themselves manufactured pretty good radios. Slowly some companies were able to pay RCA for the right to build super-hets, and eventually the patent ran out and opened the door for many small companies to do the same. The 9TX-3 is a five-tube, AM only, AC/DC radio. We replaced all of the capacitors with modern equivalents. The tubes and resistors were checked and replaced where necessary. The radio is a good performer across the dial. Gary stripped the old finish off, and ended up with a beautiful "piano" finish on the Walnut cabinet. The original knobs are made of "Beetle" plastic, Catalin and Bakelite. This very unique RCA radio is ready for your collection and is priced right! 9"W x 5"H x 4"D.
$499.00. (1600398)
|
|
|
RCA 16T4 (1940)
Although general manager David Sarnoff made RCA one of the largest companies in the world, he ran the company with an iron fist. He held the patents for new radio technology and didn't share them. Many small companies couldn't afford to pay the royalties to utilize the technologies. Despite his business techniques, the company pioneered radio and television broadcasting for the world. Their products were top-notch. The 16T4 is a six-tube, three-band (AM,SWx2) radio. With five-button electronic tuning, dual tone control for radio and phono input, and a new dual circuit loop antenna, this was one performing radio! We replaced all of the capacitors with new equivalents. The resistors and tubes were checked and replaced where necessary. A safety fuse and new power cord were installed. The radio has a factory phono input that works great with Bluetooth etc. A new addition to Joe's Radio Shop is Steve Tucker, who specializes in cabinet refinishing. Steve stripped the unique Walnut cabinet, and ended up with a gorgeous "piano" lacquer finish. The original knobs, six inch speaker and chassis are with the set. A unique RCA to add to you collection and is priced right! 19"W x 10"H x 8-1/2"D.
$499.00. (1600405)
|
|
|
RCA 124 (1934)
Every once and a while we find a unique radio. Their uniqueness and rarity can sometimes be attributed to low production numbers and slow sales. The model 124 was in the 1934 RCA line along with the 128 and 143. I believe the 128 was one of the top sellers that year, and they made a lot of them! Not so with the model 124. I had never seen this model till it showed up on Craigs List in our area, and this is the first one on the Radio Attic. That's how it happens sometimes... The 124 is a six-tube, two band (AM,police). We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced where necessary. We added a new power cord, safety fuse, antenna lead and audio input cable. The radio is a good performer, receiving stations across the dial with good tone control and plenty of volume. Gary Marvin stripped off the old finish and started with a clean slate. The speaker grille is repwood, and the cabinet is solid Teak and Mahogany woods. The original knobs, dial scale and chassis are in good condition. A period correct speaker and grille cloth are present. If you're looking for a unique and rare radio, this RCA can't be beat! 15-1/2"H x 11-1/2"W x 8-1/2"D.
$849.00. (1600542)
|
|
|
RCA 128 (1935)
RCA designed and manufactured some great radios in the 1930's. Even though RCA had a stranglehold on the industry, controlling patents for TRF and Superheterodyne radios, a few companies were given permission to utilize the patents, most notably the Gilfillan Brothers in Los Angeles. A few other companies were allowed to use the patents, but they had to meet some strict standards and manufacture their radios in the Gilfillan factory. This six-tube, three-band (SB,SWx2) with its new "magic brain" circuitry, which was basically tuned RF with VCA, and a gorgeous cabinet design was a great seller for RCA. This radio has a ton of volume and a tone control with wonderful fidelity through an 8-inch speaker. We went in and replaced all of the capacitors with modern equivalents. The tubes and resistors were checked, replacing where necessary. A safety fuse was added along with an external audio input jack and a new power cord. The jack has a switch which allows you to close the radio tuning functions, or access the audio input jack. Gary did a complete restoration on the cabinet. The Walnut is gorgeous with a "piano" lacquer finish. This big, beautiful radio can be in your collection in a matter of days! 20"H x 17"W x 11"D.
$899.00. (1600527)
|
|
|
RCA T10-1 (1936)
Despite the stranglehold RCA held over the radio industry having ownership of the Superheterodyne patents, the company did manufacture impressive radios. The T10-1 was the top of the line for 1936, and one of the big selling points was the use of the "revolutionary" new metal tubes. "The sign of an up-to-date radio!" Touted as being quieter...they didn't require shielding. The T10-1 is a ten-tube, three-band (AM,SWx2) radio. 11-plus watts of push-pull power through an 8-inch speaker, an strong performing set! We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced where needed. We installed a new polarized power cord, safety fuse and audio input for your external device. Gary stripped the Mahogany cabinet and ended up with a beautiful "piano" lacquer finish. The knobs, chassis and speaker are original. One word describes this radio... impressive! 20"H x 17" W x 14"D.
$1,195.00. (1600458)
|
|
|
Silvertone 1905 (1936)
The 1900 series Silvertones are some of my favorites. Most of them are gorgeous tombstones with different "airplane" dials. These dials were found on the top of the line Silvertone sets. The chassis in different tube combinations was used for several models from 1930 to 1938 and was manufactured by Colonial. Silvertone used dozens of furniture companies to manufacture their cabinets, and were of a high quality. The 1905 is a eight-tube, three-band (AM, SWx2) radio. This radio has push-pull audio utilizing two 6F6 output tubes. All of the capacitors were replaced with modern equivalents. The resistors and tubes were checked and replaced where needed. A new power cord, safety fuse, audio input and antenna lead were installed. This is one of the strongest performing tombstone radios I have owned, comparable to the 10-S-130 Zenith or a Philco 16B. It picks up several stations even before you deploy the antenna. There is a ton of volume with that push-pull radio through the original eight inch speaker! Gary completely restored the cabinet back to its original beauty, ending up with a gorgeous "piano" finish. The original knobs, chassis and speaker are present, and a reproduction grille cloth was added. The 1900 series Silvertones are gorgeous radios, and here's a perfect example to show off in your collection! 19-1/4"H x 14"W x 12"D.
$849.00. (1600566)
|
|
|
Silvertone 4566 (1937)
Sears offered consumers a lot of products, from toothbrushes to entire homes. Most of their products were of a high quality, and the radios they sold were no exception. The cabinets and chassis were manufactured by some of the best radio and furniture manufacturers in America. Here is a model 4566 made by Colonial for Sears "Golden Jubilee" series of radios. They used the small "Golden Jubilee" dial on several radios in 1936-1938, as well as a large version of the dial. The 4566 is a seven-tube, three-band (AM,SWx2) radio. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced where needed. We installed a new power cord, safety fuse, audio input and antenna lead. The radio performs with lots of volume and tone with great sensitivity across the dial. The tuning eye is bright and active. Gary did his usual masterful work stripping and refinishing to a "piano" lacquer finish. The knobs, speaker and chassis are original. A reproduction grille cloth was added. This radio looks and plays great, a wonderful addition to any collection! 17"W x 11"H x 9"D.
$495.00. (1600574)
|
|
|
Silvertone 6230 (1939)
Silvertone was the product name of electronics sold by Sears-Roebuck out of Chicago, Illinois. The first radio was offered in 1920 by catalog and later in retail stores. With features like the Ingraham style cabinet (possibly built by Belmont, who manufactured the chassis), tuning eye tube and five-button station, the 6230 was a good seller for Sears. The 6230 is a six-tube, two-band (AM,SW) AC/DC set. We replaced all of the capacitors with new equivalents. The resistors and tubes were checked and replaced where needed. We installed a safety fuse, a new power cord and a new antenna lead. The tuning eye tube us bright and active. Gary stripped the cabinet and refinished using high quality products. Just the right amount of toner and lacquer makes this radio a gem for any collection. We retained the original knobs, speaker and chassis. The dial cover is crystal clear. The radio is priced to sell, so come and get it! 15"W x 9"H x 7"D.
$499.00. (1600477)
|
|
|
Stewart-Warner 1302 (1935)
Stewart-Warner, based in Chicago, started manufacturing radios in 1925. Up to then they were a very successful company making automotive instruments. The company over-produced radios, making 1000 sets a day. This forced them to sell at reduced rates, not a good business model. The instrument division was always a success and carried the company to profitability. The 1302 is a five-tube, two-band (SB,SW) set. The radios were well made and were good performers. We replaced the capacitors were replaced with modern equivalents. Resistors and tubes were checked and replaced where needed. A new power cord, audio cable and safety fuse were installed. Gary refinished the radio using the best products, and finished up with a few coats of lacquer, then polished it to a gorgeous "piano" finish. He installed a reproduction grille cloth. The knobs, speaker, dial scale and chassis are all original. This particular model is hard to find. A really great radio at a great price! 17-1/2"W x 12"H x 9"D.
$849.00. (1600564)
|
|
|
Stewart-Warner R-1272 "Prado" (1934)
Stewart-Warner started incorporating multiple types of veneers and ornate grilles on their mid-size tombstones a year or two before some of the other manufacturers. They already had a great reputation of producing quality electronics, so this was another feather in their cap! They were also infamous in giving names to their radios at the factory. This five-tube, three-band (SB,SWx2) "Prado" was a solid performer, producing great fidelity and volume through its original 8-inch speaker. We replaced all of the capacitors with new equivalents. Tested resistors and tubes replacing where necessary. We wired in a new SB antenna. This radio actually has a separate antenna for shortwave as well. A new power cord, safety fuse and audio cable were installed. This radio has a gorgeous cabinet, and Gary has made it shine. He stripped the veneer, Birdseye maple, Australian laurel, Walnut and regular Maple. He applied grain filler and toner, finishing with several coats of lacquer. This radio has a gorgeous "piano" lacquer finish. The original knobs, chassis, speaker and original grille cloth are with the radio. This is one beautiful radio, one that any collector would love! 17-1/2"H x 14"W x 9-1/2"D.
$799.00. (1600562)
|
|
|
Stewart-Warner R-1802 "Cube" (1938)
Stewart-Warner started producing radios in 1925. They had already established themselves, manufacturing high-quality automobile gauges, and their radios were also of a high quality. They hired the best designers and engineers right out of college, and their products reflected that quality and precision. The R-1802 is a five-tube, two-band (AM,Police) radio. I attribute Zenith for producing the first "Cube" design radios. They were great sellers, so most manufacturers followed suit and came out with a "Cube" design. Stewart-Warner was no exception, and they manufactured a few models of their own. All of the capacitors have been replaced with modern equivalents. The resistors and tubes were checked and replaced where needed. A new power cord, safety fuse and audio input cable were installed. Gary stripped the cabinet and did a fantastic job refinishing the unique Walnut cabinet. The original knobs, speaker and chassis along with a perfect dial scale are with the radio. The cabinet features a pedestal base and presents nicely with a beautiful "piano" lacquer finish. This is simply a gorgeous, great performing radio. It's ready to grace someone's collection! 16-1/2"W x 11-1/2"H x 9-1/2"D.
$596.00. (1600531)
|
|
|
Stromberg-Carlson 230H (1937)
Stromberg-Carlson of Rochester, New York, is probably known more for their design and manufacturing of telephones, but they also made very high-quality radios. Hiring the brightest engineers right out of college, their radios were brilliantly designed and flawlessly manufactured, right down to the cabinet designs. The 230-H is a gorgeous example of that. The 230-H is a seven-tube, three-band (AM,SWx2) radio. We replaced all of the capacitors with modern equivalents. All of the resistors and tubes were checked and replaced where needed. We installed a safety fuse, power cord, audio input cable and a new antenna lead. The radio has plenty of volume through an 8-inch speaker, and good sensitivity across the dial. The tuning eye is bright and active. Gary stripped the cabinet of its old finish, and with his usual mastery ended up with a gorgeous "piano" lacquer finish. The radio has the original knobs, speaker and chassis. A reproduction grille cloth was installed. The 230-H is a large, rare radio and I doubt you can find one restored to this high quality. 24"W x 13-1/2"H x 10"D.
$1,495.00. (1600534)
|
|
|
Troy 4 "Deluxe" (1937)
Troy Radio Manufacturing Company/Radio and Television Company started up in Los Angeles in 1932 and went out of business right before WWII. Most of the chassis were made by Gilfillan, and the cabinets were of a high quality. They made several models from four-tube mantle radios to eleven-tube consoles. Even though "Television" is in their business name, I don't think they ever made any, going out of business before anyone was manufacturing them. The Model 4 is a four-tube, AM only. TRF (tuned radio frequency) set. Blake replaced all of the capacitors, checked the resistors and tubes, replacing where needed. He added a new power cable and antenna lead, but this set has no audio cable due to its circuitry. For a four-tube set, it's a good performer with plenty of volume and good tone. Gary refinished the walnut cabinet using the best toners, grain fillers and lacquer. The radio retains the original chassis, speaker, dial and knobs. A new dial cover was added. This is a rare Los Angeles radio, and will look great in any collection! 11"W x 9"H x 7"D.
$399.00. (1600563)
|
|
|
Western Air Patrol "Royale" (1932)
Up for sale we have a rare Western Air Patrol "Royale." WAP radios were made at the Gilfillan factory in Los Angeles and sold on the west coast through Western Auto Supply stores. For the east coast stores, they were marketed as Truetone and came out of the Gilfillan factory in Kansas City. The relationship between the two locations was very complicated and lengthy to go over here, simply two different makes of radios sold by the same company. Gilfillan made a lot of the chassis for them, but they also used other companies as well, all of them working out of the Gilfillan factories as the Gilfillan Brothers had rights to use the RCA patents for Superheterodyne radios. Other companies could build super-hets as long as they were made in the Gilfillan factories under their supervision. The Royale is a five-tube, two-band (AM,SW) radio. We replaced all of the capacitors with new equivalents. The resistors and tubes were checked and replaced where needed. A new power cord, safety fuse, audio input cable and antenna lead were installed. The radio performs well with good fidelity and volume through a six-inch speaker. The band switch and tone control are located in the back. Gary did a fantastic job stripping and refinishing this unique cabinet to a gorgeous "piano" lacquer finish. This is the first "Royale" to be sold on the Radio Attic. You can have this rare radio in your collection in a matter of days! 15-1/2"W x 9-1/2"H x 8"D.
$495.00. (1600569)
|
|
|
Zenith 5-R-316 (1939)
Here's a good-looking, small table radio you don't see too often, with only a few being sold over the years on the Radio Attic. In 1939, Zenith produced a dozen radios that they advertised as, "1939 Zenith Celebrates Leadership With...Lowest Prices Ever." The country was starting to pull itself out of the recession, and with WWII looming this was just a great idea! The 5-R-316 is a five-tube, AM only radio. They also offered the 6-D-316, basically the same radio, as an AC/DC set. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced where needed. We installed a new power cord, a safety fuse, an audio input cable and a new antenna lead. Gary stripped the Walnut cabinet, and skillfully worked the wood to end up with a hard lacquer "piano" finish. Gary noted that "Zenith painted the inside of their cabinets satin dark blue. This is not. I believe this Is an Ingraham cabinet." The radio has a push button on/off switch and four buttons for preset stations. The original chassis, knobs, buttons, dial cover and speaker are with the radio. This is a collector's radio, perfect for the bed stand, kitchen, den...anywhere in the house. Even your Zenith friends might mention that they had never seen one! We have a great price on this nicely restored radio! 14"W x 8-1/2"H x 8"D.
$399.00. (1600555)
|
|
|
Zenith 6-D-2620 "Boomerang" (1942)
Like all manufacturers, Zenith was scrambling a bit to produce products right before the war. Bakelite was not readily available, so the designers came up with wooden designs to use up an inventory of existing chassis. Zenith engineer Kurt Emde, who designed the "Robot Dial," came up with the "Dial-Speaker" design, which Zenith patented. This chassis was used in seven "Boomerang" models. The D-2620 is a six-tube, two-band (AM,SW), AC/DC radio. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced where needed. We installed a new power cord and a safety fuse. The radio employs a "Wave Magnet" internal loop antenna and has good reception across the dial on both bands. Gary stripped the cabinet of straight-grained Walnut. He finished the radio with a beautiful lacquer "piano" finish. A new Mark Palmquist crystal-clear dial cover was installed. The radio has the original knobs, chassis and speaker. This is a perfect example of a 6-D-2620 that would grace any collection! 14"W x 9"H x 7"D.
$549.00. (1600525)
|
|
|
Zenith 7G605 Trans-Oceanic "Bomber" (1942)
Trans-Oceanic radios were conceived in 1941 by Commander Eugene F. McDonald, president of Zenith. He wanted a portable radio he could use on his boat for entertainment, news, weather, marine shortwave as well as international stations. The Trans-Oceanic was a hit, and Zenith produced them from 1941 to 1981. Zenith began the Clipper Trans-Oceanic production in October 1941 with Sailboat graphics. In January of 1942 after the bombing of Pearl Harbor, Zenith changed the grille cloth to the Bomber graphics. By April of 1942 the US Government halted all domestic radio production, and all manufacturing was for the war effort. The 7G605 is a seven-tube, six-band (SB,SWx5) radio. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced where necessary. Gary noted the snakeskin cabinet was in good condition, and it cleaned up nicely. The handle is in good condition. The knobs are original and the two antennas are present and function well. The Trans-Oceanics were well made and are very sensitive across all bands. The "Bomber" is considered to be the "Holy Grail" of Trans-Oceanic radios, this particular "Bomber" is a gem! 17"W x 10"H x 7"D.
$1,195.00. (1600529)
|
|
|
Zenith 7-S-323 (1939)
In 1939, Zenith offered a few models of very large table radios. The cabinet had the depth of a console radio, and some of the chassis were also used in console models. In 1939, they offered a seven-tube and a nine-tube version. In 1940, they offered an eight-tube version, and a twelve-tube set. There are a few other models of this very large, highly collectable radio. The 7-S-323 is seven-tube, three-band (AM,SWx2) radio. I've always felt that the seven-tube Zeniths were some of the best receivers out there during this time period, and this one is no exception. This radio was picking up some shortwave stations in the shop during the day, which generally doesn't happen. We replaced all of the capacitors with modern equivalents. The tubes and resistors were checked and replaced where necessary. A new safety fuse, power cord, antenna lead and audio input cable were installed. Gary definitely "Marvinized" this cabinet, which was in great condition to start with. The stripping of the old finish and pristine lacquer finish are highlights of his work. The original knobs, chassis and 8-inch speaker are with the set. Gary installed a period-correct grille cloth. There just aren't many of these big Zeniths around as they just didn't make many. Here's a fine example of the seven-tube version completely restored and "collection ready!" 24"W x 14"H x 13"D.
$1,195.00. (1600536)
|
|
|
Zenith 705 (1934)
In 1933, FDR had been elected president as the country was experiencing a severe depression. Unlike most companies, Zenith had a huge surplus of cash, and produced 125 models, the 200, 400, 500 and 600 model series for 1933, up from just 25 the year before. Several models were carried over to 1934, and the 700 series radios, called the "Challenger" series came out. The 705 is a six-tube, AM only, AC powered radio. We replaced all of the capacitors with modern equivalents. We then checked the tubes and resistors, replacing where necessary. We installed a new power cord, audio cable and a new antenna lead. The radio has good sensitivity across the dial and plays with good tone and plenty of volume. Gary stripped the burl walnut and mahogany cabinet. He ended up with a beautiful "piano" lacquer finish. The radio has the original knobs, dial scale, speaker and chassis. A beautiful "mantle" radio (Zenith didn't make many) to grace your collection. 15-1/2"W x 8-1/2"H x 7"D.
$449.00. (1600396)
|
|
|
Zenith 715 (1933)
As the 1930's progressed, radio cabinet design went away from the Gothic cathedral style to the tombstone. Early tombstones would have touches of cathedral design. With a rounded arch at the top and ornate grilles along with the straight, majestic "skyscraper" influence, this radio has it all, top of the line for Zenith in 1935. The 715 is an eight-tube, standard broadcast only radio. The receiver is one of the best made in 1933. Standing 20 inches tall with an 8-inch speaker, this radio is impressive in stature and performance with volume to spare. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced where necessary. A new power cord, audio input cable, antenna lead and safety fuse were installed. The tuning meter is very active. Gary knocked it out of the park with a stellar refinish. The butt Walnut front accentuated with the maple top strip and inlay along the pilasters is gorgeous. The original chassis, knobs, dial scale and speaker are with the set. This rare, perfect Zenith can be yours! They ain't makin' 'em anymore folks! 20"H x 16"W x 9-1/2"D.
$1,195.00. (1600526)
|
|
|
Zenith 807 (1935)
The Zenith "800 series" model line for 1935 featured the small, white "airplane dial" which was replaced in 1936 with the infamous "big black dial" radios which were a huge hit for Zenith. Since the 1935 dial style was a "one-off" for the company, these sets are highly collectable, with models 809, 829 and 835 featuring chrome grilles being the most valuable and hard to find. The 807 is a five-tube, two-band (AM,SW) set. We replaced all of the capacitors with modern equivalents. The resistors and tubes were checked and replaced where necessary. We installed a safety fuse, new power cord, audio input cable and antenna lead. The 1935 radios were highly touted as good receivers, showing off some of the new circuitry that Zenith developed that year, especially their shortwave reception quality. The cabinets showed off some new veneer applications as well. Gary stripped the cabinet and skillfully refinished it, ending up with a stunning hand-polished "piano" lacquer finish. The knobs, chassis and speaker are original, and a period correct grille cloth was installed. This is the first 807 we have done, and it looks and performs like new! 18"H x 12"W x 9"D.
$649.00. (1600575)
|
|
|
Zenith 908 (1935)
The Zenith 908 is a very rare radio. Manufactured late in 1934 for the 1935 model year, it didn't even make an appearance till February of 1935. Slow sales doomed it for a very short run, and Zenith halted production shortly after its debut. So, finding this sought after radio in restored condition doesn't happen very often. The 908 is a six-tube, three-band (SB,SWx2) radio. The 1935 radios were great playing sets. We replaced all of the capacitors with new equivalents. The resistors and tubes have been checked and replaced where needed. We installed a new power cord, audio input cable and a safety fuse. It has excellent sensitivity across the dial with plenty of volume through the 8-inch speaker. Gary meticulously refinished the walnut cabinet with gorgeous Burl Walnut veneer on the front. He applied several coats of lacquer and hand-polished to a "piano" finish. The radio has the correct knobs (without the "Z"), the original chassis, dial scale and speaker. Gary installed a new, reproduction grille cloth. If you would like a rare Zenith for your collection that no one else has, then this is your radio! 18"H x 14-1/2"W x 9-1/2"D.
$1,495.00. (1600514)
|
|